Trucks Brand New Trucks Brand for Sale
If you’re a Jeep Wrangler owner, you know how valuable the hard top is during cold weather or whenever it’s raining. However, taking it off and putting it back on can be quite a hassle, especially for those with limited upper body strength. Luckily, a DIY Jeep Wrangler hard top hoist is a simple and affordable solution to this problem. With just a few materials and tools, you can easily build your own hoist in the comfort of your own garage, making removing and storing your hard top a breeze.
The DIY Jeep Wrangler Hard Top Hoist – A Step-by-Step Guide
Materials Needed
To start with the project, you need to gather the following materials: a hard top hoist, drill, drill bits, screwdriver, ratchet straps, carabiners, ropes, and gloves.
Step-by-Step Instructions
Follow these easy to follow, step-by-step instructions to create your DIY Jeep Wrangler hard top hoist:
Step 1: Install Anchor Bolts
First, you need to install anchor bolts on the garage’s ceiling. These bolts will be used to support the hard top hoist.
Step 2: Install Pulley System
Next, install the pulley system and secure it to the anchor bolts. The pulley system should be able to bear the weight of the hard top.
Step 3: Attach Ratchet Straps
Attach the ratchet straps to the hardtops.
Step 4: Hook Up Ropes
After securing the ratchet straps, hook up the ropes to the carabiners and attach them to the hard top.
Step 5: Hoist the Hard Top
Now, lift the hard top by using the pulley system.
Step 6: Remove from Jeep
Remove the hard top from the Jeep Wrangler, with the help of your friend or relative.
Step 7: Lower to the Ground
Slowly and safely lower the hard top onto the ground.
Step 8: Cover and Protect
Cover the hard top with a protective covering to keep it safe from scratches and dents.
Step 9: Store Safely
Store the hard top in a safe and secure place.
Step 10: Reattach to Jeep
Lastly, whenever you want to reattach the hardtop back to your Jeep Wrangler, repeat the process in reverse order.
Congratulations! You’ve created your very own DIY Jeep Wrangler hard top hoist. Enjoy the freedom of removing and storing your hardtop with ease, and have fun adventuring in your Jeep Wrangler!
Why DIY Jeep Wrangler Hard Top Hoist is Necessary?
If you’re a Jeep Wrangler owner, you know that removing the hardtop can be quite a task. It takes a lot of time and effort to do it alone. That’s why a DIY Jeep Wrangler hardtop hoist is necessary. It makes the task of removing the hardtop much easier and more manageable. Here are 10 reasons why you should have a DIY Jeep Wrangler hardtop hoist:
1. Convenience
A DIY Jeep Wrangler hardtop hoist will make the task of removing the hardtop much more convenient. It eliminates the need for a second person to help you remove the hardtop, which can be difficult to find on short notice.
2. Easy to Install
Most DIY Jeep Wrangler hardtop hoist products are easy to install. They come with instructions, and you won’t need any special tools to install them. You can do it yourself in less than an hour.
3. Cost-Effective
A DIY Jeep Wrangler hardtop hoist is a cost-effective option for removing your hardtop. It’s much cheaper than having a professional remove and store your Jeep’s hardtop.
4. Saves Space
When you remove the hardtop from your Jeep, it takes up a lot of space in your garage. With a DIY Jeep Wrangler hardtop hoist, you can hang your hardtop from the ceiling, saving valuable garage space.
5. Protects your Hardtop
A DIY Jeep Wrangler hardtop hoist will protect your hardtop from scratches and damage. It eliminates the need to drag the hardtop across the garage floor, which can cause scratches.
6. Time-Saving
Removing your Jeep’s hardtop can take up a lot of time. With a DIY Jeep Wrangler hardtop hoist, you can remove and store your hardtop in minutes, saving you time and effort.
7. Easy to Store
When you’re not using your DIY Jeep Wrangler hardtop hoist, you can easily store it away. It doesn’t take up much space, and you can easily reinstall it when you need to remove your hardtop again.
8. No Damage to your Jeep
With a DIY Jeep Wrangler hardtop hoist, you won’t have to worry about damaging your Jeep. You can safely remove the hardtop without it falling or damaging your vehicle.
9. Easy to Use
DIY Jeep Wrangler hardtop hoists are easy to use. They have a crank system, which makes removing and storing the hardtop a breeze.
10. Increases Resale Value
A DIY Jeep Wrangler hardtop hoist can increase the resale value of your vehicle. It shows potential buyers that you took excellent care of your Jeep’s hardtop, which can make it more appealing to them.
How to Make a DIY Jeep Wrangler Hard Top Hoist
Gather Materials
Gathering the necessary materials is the first step in making a DIY hard top hoist for your Jeep Wrangler. The materials needed for this project include:
| Materials |
|---|
| Two 2×4 lumber pieces (8 feet long) |
| One 4×4 lumber piece (8 feet long) |
| Four pulleys |
| Four 3-inch screw hooks |
| Six 1/4-inch screw eyebolts |
| 50 feet of 1/4-inch steel cable |
Prepare the Lumber
The lumber will be the foundation of the hoist and support the weight of the hard top. Begin by cutting the two 2×4 lumber pieces in half, creating four 4-foot pieces. Cut the 4×4 lumber piece into two 4-foot pieces and two 2-foot pieces.
Next, drill a hole into the center of each 4×4 piece and at both ends of the four 2×4 pieces.
Install the Hardware
Begin by installing the pulleys onto the two 4-foot 2×4 pieces. Screw the pulleys onto the wood with the screws provided in the package. Next, attach the four 3-inch screw hooks to the ceiling of your garage or workshop. Make sure the hooks are evenly spaced and capable of supporting the weight of the hard top.
Attach the four screw eyebolts to the center of each 4-foot 2×4 piece. Attach the remaining two screw eyebolts to the center of the two 4-foot 4×4 pieces. Run the steel cable through the pulleys and connect them to the screw eyebolts.
Assemble the Hoist
Lay the four 2-foot 4×4 pieces on the ground, 2 feet apart. Place the two 4-foot 4×4 pieces across the top, creating a rectangle. Secure the 4×4 pieces together with screws.
Place the 4-foot 2×4 pieces with the pulleys on top of the 4×4 rectangle and secure them with screws. Attach the four screw hooks to the hard top and lift it onto the hoist. Use the steel cable and pulleys to easily raise and lower the hard top as needed.
Conclusion
Building your own DIY Jeep Wrangler hard top hoist is an easy and affordable way to store your hard top during the warmer months. With a few simple materials and tools, you can create a hoist that will safely and easily lift and lower your hard top whenever you need it. Follow the steps outlined above to create your own custom hard top hoist today!
Learn how to make a DIY Jeep Wrangler hard top hoist with this step-by-step guide on jeepfan.com.
Souped-up Jeeps and DIY Hoists: Our Kind of DIY
Thanks for reading our guide on how to make a hard top hoist for your Jeep Wrangler! We hope you enjoyed learning how to elevate your ride to the next level. Remember, homemade hoists can make a big difference in DIY upgrades on all types of vehicles. We encourage you to come back later and check out more fun and useful DIYs that will make your life a little bit easier!